84 DNX9140/DDX814/DDX8034BTDVD SetupYou can set up the DVD play.Display the DVD Setup screen1Touch [ ] > [ ] > [DVD SETUP]. (page 66)Set each item2[Menu Language] Selects a disc menulanguage.*1(See , page 84)[Subtitle Language] Selects a subtitlelanguage.*1(See , page 84)[Audio Language] Selects an audiolanguage.*1(See , page 84)[Dynamic Range Control] Sets the dynamicrange.* 1 ( "Dialog")The dynamic range is reduced by changingfrom "Wide" to "Normal" and from "Normal"to "Dialog". "Dialog" makes the total soundvolume becomes larger as compared with"Wide" and "Normal", allowing you to listen tothe movie's dialog more clearly.This is effective only when you are using aDolby Digital software.The operation is available during the play stopmode.[Angle Mark] Sets an angle mark display.( "ON")[Screen Ratio] Selects the screen displaymode.*1 ( "16:9")"16:9": Displays wide pictures."4:3 LB": Displays wide pictures in the LetterBox format (having black stripes at thetop and bottom of screen)."4:3 PS": Displays wide pictures in the Pan &Scan format (showing pictures cut atthe right and left ends).[Parental Level] Displays the Parental Lockscreen.* 1 ( "OFF")(See , page 85)[Disc SETUP] Makes the settings related to thedisc media. (See , page 86)⁄*• Disabled when a DVD is being played.DVD Language SetupSelects a language you use for the speech andmenus.Display the DVD Setup screen1Touch [ ] > [ ] > [DVD SETUP]. (page 66)Select the language item to set2Enter a language code3See (page 99) andselect the desired language.1111 Enters a language code.[Cancel] Cancels the language setup andreturns to the "DVD SETUP" screen.[Enter] Sets the language and returns to the"DVD SETUP" screen. (It appears after you haveentered a language code.)[Original] Sets the DVD's original language(only when setting an audio language).[Clear] Clears the language code.Set the language you use4Setup Menu
