Kenwood DDXBH Instruction Manual

36BLUETOOTH❏ Connecting a registered Bluetoothdevice1 Display the <Bluetooth Setup> screen.(Page 35)23 Select the device you want to connect(1), then select what you want to use thedevice for (2).*[TEL (HFP)]: for mobile phone[Audio (A2DP)]: for Bluetooth audio player[PANDORA (SPP)]: for Pandora*• Selectable items depend on the device youare operating.• If you connect a device while another deviceis connected, the device previously connectedis disconnected and the connection for thenewly connected device is established.• When a Bluetooth mobile phone is connected,the signal strength and battery level aredisplayed when the information is acquiredfrom the device.To disconnectSelect [TEL (HFP)], [Audio (A2DP)], or [PANDORA(SPP)]* to disconnect the Bluetooth device beingused for that function on the aired Device List>screen (see the left column).* [PANDORA (SPP)] appears only for DDX672BH/DDX492/DDX392/DDX372BT/DDX320BT.❏ Deleting a registered Bluetooth device1 Display the <Bluetooth Setup> screen.(Page 35)23 Select a device to delete (1), then deletethe registration (2).*A confirmation message appears. Press [Yes].* [PANDORA (SPP)] appears only for DDX672BH/DDX492/DDX392/DDX372BT/DDX320BT.Using the Bluetooth mobile phone❏ Receiving a callWhen a call comes in...• Call information is displayed if acquired.• Phone operation is not available while thepicture from the rear view camera is displayed.(Page33)To reject a callWhen <Auto Response> is set to [ON] (Page 41)The unit answers the incoming call automatically.❏ Ending a callWhile talking...