Kenwood DDXBH Instruction Manual

ENGLISH 43SETTINGS❏ Adjusting the crossover frequency1 Display the <X’over> screen.On the <TOP MENU> screen:• When <X’over> is grayed out, you cannotchange the setting. Select [Unlock] on the<SETUP Memory> screen to change thesetting. (Page 47)2 Select the item to adjust (1), then makeadjustments (2).<HPF> Adjusts the crossover for thefront/rear speakers (high passfilter).<LPF> Adjusts the crossover for thesubwoofer (low pass filter).*1<Level> Adjusts the subwoofer level.*1hase> Selects the phase for thesubwoofer.*2<Freq> Adjusts the crossover frequency.*1 Adjustable only when the subwoofer is activated. (Page 48)*2 Not selectable when <Freq> is set to <Through>.Adjustment for video playback❏ Adjusting the pictureYou can adjust the picture quality.1 Display the adjustment menu.• When the App screen is displayed, you canpress AV on the monitor panel to switch to thepicture adjustment menu.2 Select [DIM ON] (dimmer on) or [DIM OFF](dimmer off).3 Adjust the picture (–15 to +15).<Bright> Adjusts the brightness.<Contrast> Adjusts the contrast.<Black> Adjusts the blackness.<Color> Adjusts the color.<Tint>* Adjusts the tint.<Sharpness> Adjusts the sharpness.* Adjustable only when the incoming signal is NTSC.