Kenwood DDXBH Instruction Manual

ENGLISH 5INITIAL SETTINGS4 Enter a four-digit number (1), thenconfirm the entry (2).• Press [Clear] to delete the last entry.• Press [Cancel] to cancel the setting.5 Repeat step 4 to confirm your securitycode.• When the unit is being reset or disconnected fromthe battery, you are required to enter the securitycode. Enter the correct security code, then press[Enter].❏ Activating the security functionYou can activate the security function to protectyour receiver system against theft.1 Display the <System> setting screen.On the <TOP MENU> screen:• Press [ ] repeatedly to change the page onthe <System> menu screen.2The security indicator on the monitor panelflashes when the vehicle ignition is off.To deactivate the security function: Select [OFF]for <SI>.Clock settings1 Display the <TOP MENU> screen.On the source control screen:2 Display the <Setup> screen.3 Display the <Clock> screen.4 Set the clock time.<Radio DataSystem>Synchronizes the clock time withFM RBDS.<OFF> Sets the clock manually. (Seebelow.)When selecting <OFF>:Adjust the hour (1), then adjust the minute (2).• Press [Reset] to set the minute to “00”.5 Finish the procedure.