Kenwood DDXBH Instruction Manual

48SETTINGSSetting menu items❏ Displaying the <Setup > menu screenOn the <TOP MENU> screen:• You cannot change the <Audio> settings screenwhen [STANDBY] is selected on the <TOPMENU> screen. (Page 8)❏ <Audio> setting screen<Fader/Balance>Fader: Adjust the front and rear speaker outputbalance.• F6 to R6 (Initial: 0)– When using a two-speaker system, set the faderto the center (0).Balance: Adjust the left and right speaker outputbalance.• L6 to R6 (Initial: 0)Press [J]/[K]/[H]/[I] or drag [ ] to adjust.– To clear the adjustment, press [Center].ualizer>Change the sound mode or adjust and store theequalization for each source. (Page 42)• Drive EQ (Initial)/Natural/Rock/Pops/Easy/Powerful/Top40/Jazz/User<Loudness>You can activate/deactivate loudness.• ON (Initial): Boost low and high frequencies toproduce a well-balanced sound at a low volumelevel. The LOUD indicator lights up.• OFF: Cancels.<X’over>*Adjust the crossover frequency. (Page 43)<Volume Offset>Adjust and store the auto-adjustment volume levelfor each source. (For discs, the adjustment is storedfor each of the following categories: DVD/VCD, CD,and DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC.) Thevolume level will automatically increase or decreasewhen you change the source.• –15 to +6 (Initial: 0)<Subwoofer>*• ON (Initial): Activates the subwoofer.• OFF: Deactivates the subwoofer.<Bass Boost>Select your preferred bass boost level.• OFF (Initial)/Level 1/Level 2/Level 3<Speaker Select>*Select the size of the connected speaker.• Standard (Initial)/Narrow/Middle/Wide* When an item is grayed out, you cannot change the setting. Select[Unlock] on the <SETUP Memory> screen to change thesetting. (Page 47)