Kenwood DMX5019DAB Instruction Manual

40 ENGLISHRemote controller mode switchThe functions operated from the remote controllerdiffer depending on the position of the mode switch.• AUD mode: Switch to this mode when controlling aselected source or tuner source, etc.– When controlling a player that is not integrated inthe unit, select “AUD” mode.• DVD mode: Not used.• TV mode: Not used.• NAV mode: Not used.• The position of the remote control mode switch isindicated in the title of each mode, e.g., “AUD mode”.Remote ControllerRemote ControllerCAUTION• Put the remote controller in a place where it willnot move during braking or other operations. Adangerous situation could result if the remotecontroller falls down and gets wedged under thepedals while driving.• Do not leave the battery near fire or under directsunlight. A fire, explosion or excessive heatgeneration may result.• Do not recharge, short, break up or heat the battery,or place it in an open fire. Such actions may causethe battery to leak fluid. If spilled fluid comes incontact with your eyes or clothing, immediately rinsewith water and consult a physician.• Place the battery out of reach of children. In theunlikely event that a child swallows the battery,immediately consult a physician.Basic operationsCommon operations (AUD mode)SRC • Selects the source.• Hangs up the incoming/currentcall.VOL J/K Adjusts the volume level.ATT Attenuates/restores the sound.VOICE/FNC/MENU/PBCFor USB/iPod: Switches to thecurrent source control screen.ENTER Enters options.Answers incoming calls.ROUTE M/MODE/TOP MENUChanges the aspect ratio.• The aspect ratio changes eachtime you press this key.VIEW/AV OUT Switches the AV source to beoutput.MAP DIR/OPEN Not used for this unit.NAV/DISP Switches to the current sourcecontrol screen.ZOOM OUT/IN Not used for this unit.2 ZONE Not used for this unit.R.VOL Not used for this unit.