Kenwood DMX8018S Instruction Manual

USB17EnglishUSBConnecting a USB device1 Connect the USB device with the USBcable. (P.61)2 Press the [HOME] button.3 Touch .4 Touch [USB]. (P.10)Ñ Disconnect the USB device1 Press the [HOME] button.2 Touch a source other than [USB].3 Detach the USB device.Ñ Usable USB deviceYou can use a mass-storage-class USB device onthis unit.The word “USB device” appearing in this manualindicates a flash memory device.● About file systemThe file system should be the one of thefollowing.• FAT16 • FAT32 • exFAT • NTFSNOTE• Install the USB device in the place where it willnot affect safe driving.• You cannot connect a USB device via a USB huband Multi Card Reader.• Take backups of the audio files used with thisunit. The files can be erased depending on theoperating conditions of the USB device.We shall have no compensation for any damagearising from any erased data.USB Basic OperationMost functions can be controlled from thesource control screen and playback screen.NOTE• Set the remote controller mode switch to AUDmode before starting operation, see Switch theoperation mode (P.54).Control screen4352617Open the drawer541 CODEC / [ ] / [ ]• When a high-resolution source is played, itsformat information is displayed.• [ ] : Repeats the current track/folder. Eachtime you touch the key, repeat mode switchesin the following sequence;File repeat ( ), Folder repeat ( ), Repeatall ( )• [ ] : Randomly plays all tracks in currentfolder. Each time you touch the key, randommode switches in the following sequence;File random ( ), Random off ( )2 Track informationDisplays the information of the current file.Only a file name and a folder name are displayedif there is no tag information.