Kenwood DMX8018S Instruction Manual

Basic Operations7English■ [Camera]Set the parameters for the camera.1 Touch [Camera].2 Set each item and touch [ ].For detailed operation, see Camera Setup(P.37).■ [DEMO]Set the demonstration mode. Default is "ON".1 Touch [DEMO] and set ON or OFF.2 Touch [Finish].NOTE• These settings can be set from the SETUP menu.See Setting Up (P.40).Security Code SetupYou can set up a security code to protect yourreceiver system against theft.When the Security Code function is activated,the code cannot be changed and the functioncannot be released. Note the Security Codecan be set as the 4 digit number of yourchoice.1 Press the [MENU] button.hh Popup menu appears.2 Touch [SETUP].hh SETUP Menu screen appears.3 Touch [Security].hh Security screen appears.4 Touch [Security Code Set] on the Securityscreen.hh Security Code Set screen appears.5 Enter a security code with four-digitnumber and touch [Enter].6 Enter the same code again and touch[Enter].Now, your security code is registered.NOTE• Touch [BS] to delete the last entry.• If you enter a different security code, the screenreturns to step 5 (for the first code entry).• if you have disconnected the Receiver frombattery, enter the correct security code as thatyou have entered in step 5 and touch [Enter]. Youcan use your receiver.To change the security code:1 Touch [Security Code Change] on theSecurity screen, then repeat step 5 and 6.To clear the security code:1 Touch [Security Code Cancellation] onthe Security screen.