Kenwood DMX8018S Instruction Manual

Other External Components38■ [Dashboard Camera /Front Camera][Dashboard Camera]: Select this when thedashboard camera is connected.[CMOS 3-Series Camera]: Select this whenthe CMOS-3xx series with ID 2 ("FrontCamera") set is connected.[Other]: Select this when the other camera isconnected.[OFF ](Default): Select this when no camera isconnected.■ [Front Camera Settings]If you select [CMOS 3-Series Camera] for[Dashboard Camera /Front Camera],adjusts the CMOS-3xx series with ID 2 ("FrontCamera") set. For details, see the instructionmanual of your camera.■ [Front Camera Mirror Image]If you select [Other] for [DashboardCamera /Front Camera].[ON]: Displays the picture from the front viewcamera horizontally reversed.[OFF ](Default): Displays the picture from thefront view camera as it is.To adjust the parking guidelinesNOTE• Install the rear view camera in the appropriateposition according to the instructions suppliedwith the rear view camera.• When adjusting the parking guidelines, makesure to use the parking brake to prevent the carfrom moving.1 Touch [ON] of [Parking Guidelines] in theCamera screen. (P.37)2 Touch [Guidelines SETUP] in the Camerascreen.3 Adjust the parking guidelines byselecting the mark.4 Adjusting the position of the selectedmark.ABC DMake sure that A and B are horizontallyparallel, and that C and D are the samelength.NOTE• Touch [Initialise] and after touch [Yes] to set allthe marks to the initial default position.