Kenwood DMX8018S Instruction Manual

Controlling Audio46Controlling AudioNOTICE• Each operation in this section can be started fromthe multi function menu.You can adjust the various settings such asaudio balance or subwoofer level.1 Press the [MENU] button.hh Popup menu appears.2 Touch [Audio].See the following section for eachsetting.• Set up speaker/ X’over (P.47)• Controlling equalizer (P.49)• Set listening position/ DTA (P.52)• Controlling general audio (Fader /Balance) (P.49)• Set volume offset (P.50)• Performing zone control (P.51)• Set sound effect (P.51)3 way speaker system setupSelect the appropriate crossover networkmode according to the speaker system (2-wayspeaker system or 3-way speaker system).1 Press the [HOME] button.hh HOME screen appears.2 Touch [ ].hh Source selection screen appears.3 Touch [STANDBY].4 Press the [S (1)] button and the [CAM](2) button for 1 second at the same time.21hh Speaker system select screen appears.5 Select the crossover network mode.hh A confirmation screen appears.6 Touch [Yes].NOTE• When the 3-way speaker system is selected, thefollowing functions are disabled.– Zone Control– Fader of Controlling General Audio– Front focus of Listening Position/ DTA– Select the speakers to output the sound fromcell-phone of Blutooth HF/Audio– Beep of User Interface Setup• Connecting 3-way speakers with the 2-way modeselected can break the speakers.