Kenwood DNN990HD Instruction Manual

Also see for DNN770HD: Instruction manual Quick start guide

Contents

90 91Return to the Top pageHD RadioReturn to the Top pageHD Radio6 Preset listDisplays the list of preset stations or channels and the information.7 Sub function menuThe following functions can be performed by using keys in this area.• Switches the band: Touch [AM] or [FM].• Tunes in a station: Touch [E] [F]. The method of frequency switching can be changed. See Seekmode.• Selects a channel: Touch [CH S] or [CH R].• Stores the information about the song being received: Touch [ ]. See Bookmark (P.95).• Tunes in by entering direct number:Touch [ ] and enter the desired number. For details, see Direct search (P.92).8 Sub function/ List switching keyTouch to display “Sub function menu” (7 in this table).Touch and hold to switch between the preset list and the information list.In HD Radio tuner mode, tuned program information will be displayed.ÑMulti function menuThe functions of each key are as follows.[P1] - [P6]Select the preset station. Touch for 2 seconds to store the current station into the preset memory.[ ]Select search method from preset station selection, channel selection or bookmark selection. Fordetails on search operation, see Selecting Operation (P.91), Bookmark (P.95).[TI]Sets the traffic information mode on. For details, see Traffic Information (P.93).[SEEK]Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].• AUTO1: Tunes in a station with good reception automatically.• AUTO2: Tunes in stations in memory one after another.• MANUAL: Switches to the next frequency manually.[AME]Selects the auto memory mode. For details, see Auto memory (P.91).[RCV]Switches the receive mode in the following sequence; [AUTO], [DIGITAL], [ANALOG]. For details, seeReceive Mode (P.94).[PTY]Searches a program by setting program type. For details, see Search by program type (P.92).Memory OperationÑAuto memoryYou can automatically store stations withgood reception to memory.NOTE• Auto memory terminates when 6 stations arestored or when all stations are tuned in.• Auto memory ends automatically if you do notoperate within 10 seconds.1 Touch [ ].Sub function menu appears.2 Touch desired band key.3 Touch [ ] in the control screen.The multi function menu appears.4 Touch [AME] in the multi functionmenu.5 Touch [A] or [B] in the subfunction menu.Auto memory starts.ÑManual memoryYou can store the current receiving station orchannel in memory.1 Select a station or channel you wishto store in memory.2 Touch [P#] (#:1-6) in which you wantto store the station or channel for 2seconds until a beep sounds.Selecting OperationÑPreset selectYou can list and select memorized station orchannel.Selecting from the multi functionmenu1 Touch the desired number from P1to P6.The navigation system will tune to theselected station or channel.Selecting from the preset list1 Touch illustrated area.List Control screen appears.2 Touch and hold [ ].Preset list appears.3 Select a station or channel from thelist.NOTE• Touching [ ] and then [Preset List] displaysthe preset channel list. You can also select yourdesired channel from the list.