Kenwood DNN990HD Instruction Manual

Also see for DNN770HD: Instruction manual Quick start guide

Contents

134 135Return to the Top pageSetting UpReturn to the Top pageSetting UpNavigation SetupYou can set navigation parameters.1 Touch [ ] on any screen.2 Touch [SETUP].SETUP Menu screen appears.3 Touch [Navigation].Navigation SETUP screen appears.4 Set each item as follows.NAV Interrupt SpeakerSelect speaker(s) used for voice guidance ofthe navigation system.Front L: Uses the front left side speaker forvoice guidance.Front R: Uses the front right side speaker forvoice guidance.Front All (Default): Uses both front speakersfor voice guidance.NAV Voice VolumeAdjust the volume for voice guidance of thenavigation system. Default is “20”.NAV MuteMutes the volume of rear speakers duringvoice guidance of the navigation system.Default is “ON”.Camera SetupYou can set camera parameters.1 Touch [ ] on any screen.2 Touch [SETUP].SETUP Menu screen appears.3 Touch [Camera].Camera SETUP screen appears.4 Set each item as follows.Rear Camera*1* 4Select the type of rear camera to use.CMOS-310: When the CMOS-310/CMOS-300series with ID 1 set is connected.Other (Default): When the other camera isconnected.R-CAM InterruptionSet a method for switching the display. Settingvalues are ON and OFF.ON: Switches to the rear view camera videodisplay when shifting to reverse orpressing the

button for 1 second.OFF (Default): Switches to the rear viewcamera video display whenpressing the

button for1 second.R-CAM Settings*2*4Adjust the CMOS-310/CMOS-300 series with ID1 set. For details, see the instruction manual ofyour camera.Front Camera*1*4Turn this setting on when the CMOS-310/CMOS-300 series with ID 2 set is connected.Setting values are ON and OFF. Default is “OFF”.F-CAM Settings*3*4Adjust the CMOS-310/CMOS-300 series with ID2 set. For details, see the instruction manual ofyour camera.*1 These settings become settable only whenthe parking brake is on.*2 This setting becomes settable only whenthe parking brake is on and the CMOS-310/CMOS-300 series is selected.*3 This setting becomes settable onlywhen the parking brake is on and “FrontCamera” is set to [ON].*4 DNN990HD only.