Kenwood DNN990HD Instruction Manual

Also see for DNN770HD: Instruction manual Quick start guide

Contents

150 151Return to the Top pageRemote Control OperationReturn to the Top pageRemote Control Operationñ Remote ControlThis navigation system can be operated using the remote controller.#CAUTION• Put the remote controller in a place where it will not move during braking or other operations. Adangerous situation could result, if the remote controller falls down and gets wedged under thepedals while driving.• Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heatgeneration may result.• Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may causethe battery to leak fluid. If spilled fluid comes in contact with your eyes or on clothing, immediatelyrinse with water and consult a physician.• Place the battery out of reach of children. In the unlikely event that a child swallows the battery,immediately consult a physician.Battery InstallationIf the remote controller operates only over shorter distances or does not operate at all, it ispossible that the batteries are depleted.In such instances, replace the both batteries with new ones.1 Insert two “AAA”/“R03”-size batteries with the ¢ and ¤ poles aligned properly,following the illustration inside the case.ÑSwitching the operation modeThe functions operated from the remotecontroller differ depending on the positionof the mode switch.DVDT VNAVAUD••••AUD modeSwitch to this mode when controlling aselected source or tuner source, etc.DVD modeSwitch to this mode when playing a discmedia including DVD, VCD, and CD.NAV modeSwitch to this mode when controllingnavigation function.NOTE• When controlling a player that is not integrated inthe unit, select “AUD” mode.ÑDirect search modeUsing the remote controller, you can jumpdirectly to the desired file, track chapter, etc.with entering the number corresponding tothe content.NOTE• This operation cannot be performed for USBdevice and iPod.1 Press the <#BS> button several timesuntil the desired content appears.The available content are differentdepending on the source.DVDTitle number/Chapter number/Play time/Itemnumber** You may not be able to use this function withsome discs or scenes.VCD 1.X and 2.X (PBC OFF)Track numberVCD 2.X (PBC ON)Scene number/numberMusic CDTrack number/Play timeAudio filesFolder number/File numberHD Radio tunerFrequency value/Channel numberSiriusXMChannel number2 Enter the number of the contentyou want to play using the numerickeypad.3 For DVD or VCD, press the button.For music CD or audio files, press the button.For radio, press the <C> or <D>button.The content you entered is played.Functions of the Remote Control Buttons