Kenwood DNR876S Instruction Manual

Also see for DNX996XR: Instruction manual Quick start guide

Contents

Other External Components84Other External ComponentsView CameraNOTE• To connect a camera, see P.113.• To use a rear view camera, a REVERSE leadconnection is required. (P.112)• If [Rear Camera Interruption] is active thecamera screen is displayed when you shift thegear to the reverse (R) position.Ñ Display the camera screen1 Press the [MENU]/[ ] button.hh Popup menu appears.2 Touch [Camera].hh View camera screen appears.3 Adjust each item as follows.To erase the caution message, touch thescreen.23 411 Switching the View Camera * 1Touch to display the camera switching keys.It is necessary to set “Camera AssignmentSettings” beforehand. See To switch the viewcamera (P.84).2 Camera offTouch to exit the camera screen.3 Switching the Guideline * 2Touching each time turns on or off theguideline.4 Switching the Angle * 2Touching each time changes camera angles.*1 When two or more cameras of rear, front, left,and right are connected with this unit.*2 When CMOS-3xx series is connected withthis unit.To switch the view camera1 Touch [ 1 ].hh Camera switching keys appear left/rightside.2 Select a view camera you want to switch.NOTE• The position to display the camera switchingkeys is opposite to the setting of [Parking AssistPosition]. (P.90)• To switch to the picture other than selectableview camera from the camera switching keys,change the key function of except “Rear” in[Camera Assignment Settings]. (P.85)Ñ Camera Setup1 Press the [MENU]/[ ] button.hh Popup menu appears.2 Touch [SETUP].hh SETUP Menu screen appears.3 Touch [Camera].hh Camera screen appears.