Controlling Audio95EnglishControlling AudioYou can adjust various settings such as audiobalance or subwoofer level.1 Press the [MENU]/[ ] button.hh Popup menu appears.2 Touch [Audio].See the following section for eachsetting.• Set up speaker / X’over (P.96)• Controlling equalizer (P.98)• Set listening position / DTA (P.101)• Controlling general audio (Fader /Balance) (P.98)• Set volume offset (P.99)• Performing zone control (P.100)• Set sound effect (P.100)• Memory/recall the audio settings(P.103)3-way speaker system setup(DNX996XR / DNX696S)Select the appropriate crossover networkmode for the speaker system used (2-way or3-way speaker system).1 Press the [HOME]/[ ] button.hh HOME screen appears.2 Touch [ ].hh Source selection screen appears.3 Touch [STANDBY].4 Press the button 1 followed by thebutton 2 for 1 second at the same time.DNX996XR2 1DNX696S21hh Speaker system select screen appears.5 Select the crossover network mode.hh A confirmation screen appears.6 Touch [Yes].NOTE• When the 3-way speaker system is selected, thefollowing functions are disabled.– Front focus of Listening Position / DTA– Fader for Controlling General Audio– Zone Control– Selection of the speakers to output sound fromthe cell-phone of Bluetooth HF/Audio– Beep for User Interface Setup• Connecting 3-way speakers with the 2-way modeselected can break the speakers.
