Kenwood DNR876S Instruction Manual

Also see for DNX996XR: Instruction manual Quick start guide

Contents

Setup90User Interface SetupYou can setup user interface parameters.1 Press the [MENU]/[ ] button.hh Popup menu appears.2 Touch [SETUP].hh SETUP screen appears.3 Touch [User Interface].hh User Interface screen appears.4 Set each parameter as follows.■ [Small Audio Text]Change the text size for the source controlscreen.[ON] : Change the text size smaller.[OFF] (Default): Cancel.■ [Beep] (Except DNX996XR)Turn the key touch tone on or off.Default is “ON”.■ [Beep Volume] (DNX996XR)Set the sound volume of the key touch tone."0" (Off ) – "3" (Default) – "5"■ [Widget SETUP]Set up the widget displayed on the Homescreen. (P.26)■ [Parking Assist Display]When an ADS adapter is connected, you candisplay information about obstacles aroundthe car.[ON]: Always displays information.[Dyn.] (Default): Displays information whenthe sensor detects obstacles.[OFF]: Cancels this function.This can be set when the iDataLink(commercially available) is connected.■ [Parking Assist Position]Select where to display information aboutobstacles on the screen (left or right).“Left”/“Right” (Default)This can be set when the iDataLink(commercially available) is connected.■ [Language Select Mode]Selects the mode to select a language.[Easy] (Default): Selects a language easily.[Advanced]: Allows you to select languagesfor respective items.*■ [Language Select]Select a language.■ [Touch Panel Adjust](Except DNX996XR)Adjust the sensing position of the touchpanel. (P.91)■ [Time Format]Select the time display format."12-Hour" (Default)/"24-Hour"■ [Clock][NAV-SYNC ](Default): Synchronizes the clocktime with navigation GPS data.[Manual]: Set the clock manually.■ [Time Zone]If you have selected [Manual] for Clock,select the time zone.■ [Clock Adjust]If you select [Manual] for Clock, adjust thedate and time manually. (P.91)* If you select [Advanced] for LanguageSelect Mode, the following screenappears.■ [GUI Language Select]Selects the display language used for thecontrol screen and so forth.■ [Navigation Language Select]Selects the language used for navigation.