Kenwood DNX521DAB Instruction Manual

Also see for DNX4210DAB: Instruction manual

Contents

4646 47Return to the Top pageRadio, TVReturn to the Top pageRadio, TVDAB Basic Operation (DNX521DAB, DNX4210DAB only)Most functions can be controlled from the source control screen.NOTE• Set the remote controller mode switch to AUD mode before starting operation, see Switching the operationmode (P.89).13 45627Control screen1 Information display/Control switching areaDisplays the following information.• [DB1] etc.: Band display• MHz/kHz: Frequency display• Preset #: Preset number2 Multi function keyTouch to switch the multi function menu. For details on the menu, see Multi function menu (P.47).3 Preset key/Multi function menuRecalls the memorized station or channel. When touched for 2 seconds, stores the current receivingstation or channel in memory.When switched, various functions can be performed by using keys in this area.For details on the menu, see Multi function menu (P.47).4 List switching keyTouch to switch between the preset list and the information list.5 Sub function menuThe following functions can be performed by using keys in this area.• Switches the band: Touch [DB].• Tunes in an ensemble: Touch [4] [¢]. The method of ensemble switching can be changed. SeeMulti function menu (P.47).• Tunes in a ensemble, service, and component:Touch [<<<<] [>>>>]. The method of ensemble, service, and component switching can be changed.See Multi function menu (P.47).6 Label infomationDisplays the list of preset service.Displays the information of the current service: Service Label, PTY Label, Ensemble Label, Audio Quality7 Signal Strength indicationDisplays the received signal strength of the DAB station.Multi function menuThe functions of each key are as follows.[ ]Displays the list of preset stations or services. For details, see List select (P.52).[P1] - [P5]Selects the preset ensemble. Touch for 2 seconds to store the current ensemble into the presetmemory.[DLS]Touch to display the Dynamic Label Segment screen.[TI]Sets the traffic information mode on. For details, see Traffic Information (P.53).[SEEK]Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].• AUTO1: Tunes in a ensemble with good reception automatically.• AUTO2: Tunes in ensemble in memory one after another.• MANUAL: Switches to the next ensemble manually.[PTY]Searches a program by setting program type. For details, see Search by program type (P.53).[ REAR ]Touch to mute the rear speaker.[ SETUP]Touch to display the SETUP Menu screen. See Setting Up (P.70).[ AUDIO]Touch to display the Audio Control screen. See Controlling Audio (P.82).