Kenwood DNX521DAB Instruction Manual

Also see for DNX4210DAB: Instruction manual

Contents

88 9Return to the Top pageBasic OperationsReturn to the Top pageBasic OperationsDNX4210DAB1 7 9823456NOTE• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,they may be different from the actual panels.• In this manual, each model name is abbreviated as follows.DNX4210DAB :If above icons are showed, read the article applicable to the unit you use.Number Name Motion1 fi (Reset) • If the unit or the connected unit fails to operate properly, the unit returnsto factory settings when this button is pressed (P.95).• If the SI function is turned on, this indicator flashes when the vehicleignition is off (P.74).2 MENU • Displays the Top Menu screen (P.16).• Pressing for 1 second turns the power off.• When the power off, turns the power on.3 NAV • Displays the navigation screen.• Pressing for 1 second switches AV out sources.4 TEL • Displays the Hands Free screen (P.58).• Pressing for 1 second turns off the display.5 Volume Knob • Pressing switches attenuation of the volume on/off.• Turning adjusts volume up or down.• Pressing for 1 second displays Tone Control screen (P.85).*6 SCRN • Displays the Screen Control screen.• Pressing for 1 second displays rear view camera display.7 RemoteSensorReceives the remote control signal.8 0 (Eject) • Ejects the disc.• Pressing for 1 second ejects the disc forcibly.9 Disc insertslotA slot to insert a disc media.* The display may not switch to the Tone Control screen in some conditions.