Kenwood DNX521DAB Instruction Manual

Also see for DNX4210DAB: Instruction manual

Contents

1010 11Return to the Top pageBasic OperationsReturn to the Top pageBasic OperationsTurning On The UnitThe method of turning on is different depending on the model.Press the button.The unit is turned on.● To turn off the unit:Press the button for 1 second.If it is your first time turning the unit on after installation, it will be necessary to performInitial setup (P.11).1Initial setupPerform this setup when you use this unit first time or when you reset the unit (P.95).Set each item as follows.LanguageSelect the language used for the control screen and setting items. Default is “British English (en)”.1 Touch [SET].2 Touch [2] or [3] to select the desired language.3 Touch [Enter].For detailed operation, see Language setup (P.73).iPod AV Interface UseSet the terminal which your iPod is connected to. Default is “iPod”.1 Touch [iPod] or [AV-IN2].ColorSet the screen and button illumination color. You can select whether to allow color scan operation orselect a fixed color for operation.1 Touch [SET].2 Touch [ON] or [OFF] of [Panel Color Scan].3 If you want to change color, touch [SET] of [Panel Color Coordinate].4 Touch your desired color and [ ].For detailed operation, see Panel color coordinate (P.76).CameraSet the parameters for the camera.1 Touch [SET].2 Touch [ON] or [OFF] of [R-CAM Interruption].3 Touch [ ].For detailed operation, see Camera Setup (P.79).1Continued