Kenwood DNX521DAB Instruction Manual

Also see for DNX4210DAB: Instruction manual

Contents

7676 77Return to the Top pageSetting UpReturn to the Top pageSetting UpDisplay Setup1 Touch [Menu] on any screen.2 Touch [SETUP].SETUP Menu screen appears.3 Touch [Display].Display Menu screen appears.See the following section for each setting.• Adjust panel color (P.76)• Changing background image (P.77)Panel color coordinateYou can set the screen and buttonillumination color.The selectable items differ depending on theunit.1 Touch [Color] in the Display Menuscreen.Color screen appears.2 Touch [SET] of[Panel Color Coordinate].Panel Color Coordinate screen appears.NOTE• You can touch [SET] or [Initialize] when[Panel Color Scan] is set to off.• Touch [Initialize] to reset the settings to thedefault settings.3 Touch the desired color.Registering original colorYou can register your original color.1 Touch [Adjust] in the Panel ColorCoordinate screen.Panel Color RGB Coordinate screenappears.2 Use [2] and [3] to adjust each colorvalue.3 Touch the desired preset key for 2seconds.Panel color scanYou can set the panel color to continuouslyscan through the color spectrum.1 Touch [ON] of [Panel Color Scan] inthe Color screen.Panel Color Scan is set to on.Changing background imageYou can load an image from the connectedUSB device and set it for the backgroundimage.Before operating this procedure, it isnecessary to connect the device which hasthe image to load.1 Touch [Background] in the DisplayMenu screen.Background screen appears.2 Touch [STANDBY].3 Touch [Memory] of[User Background].User Background File Select screenappears.4 Select the image to load.Continued