60 DNX9980HDBluetooth SetupRegistering Bluetooth UnitRegisters the Bluetooth unit to be connected.1 Display the Hands-Free Control screen2 Display the Bluetooth Setup screen3 Search for a Bluetooth unit4 Display the PIN Code Set screen11 Display the PIN Code.[ ] When the text is longer, the text display isscrolled by touching it.[Search] Searches for a Bluetooth unit.[Cancel] Cancels searching of Bluetooth unit.[SP DEV] Registers a Bluetooth unit that cannotbe registered by normal register (pairing)operation.[PIN Code Set] Display the PIN Code Set screen.⁄• A new device cannot be registered if there are 5registered Bluetooth units. Delete unnecessaryregistration. See (page62).5 Enter PIN code11 Enters a code number.[Enter] Enter the PIN code specified for theBluetooth unit to register.This button will not be active until at least fourPIN code digits have been entered.[Cancel] Cancels registration of PIN code.[Clear] Clears the code number.6 Select the Bluetooth unit to register11 Displays the searched Bluetooth unit.Returns to the Connect Device List screen.⁄• You can also register from the Bluetooth unit side.For the PIN code necessary for registration, see (page 61).• If pairing cannot be done even when the PIN code iscorrect, try .
