Kenwood DPF-1010 Instruction Manual

Also see for DPF-1010: Service manual Service manual

Kenwood DPF-1010 Instruction Manual Manual pdf 12 page image

12DPF-3010/2010/1010 (En)Normal play (TRACK mode)2 Load a disc.3 Start playback.1 Open the tray.Use the following procedure to play a CD in the original orderof tracks from track No. 1.: Keys and control used in the operations described on this page.3 Close the tray.Playing tracks in order from track No. 1÷ Playback starts when a disc has been loaded.To pause playback2 Place a disc.Disc trayPress the ON/STANDBY switch to ON.Label side÷ After a few seconds, play starts from the track No. 1.Elapsed time of track being playedTrack NO. being played1Lights up.÷ Each press pauses and plays the CD alternately.To stop playback÷ Do not touch the played side of disc.÷ Loading two discs together will cause malfunctioning.÷ Place the disc properly along the groove on the tray. (If the disc is notplaced horizontally, malfunction will result.)÷ A single CD (8 cm disc) can also be played.÷ Ordinary CD single (8 cm) disc adapters sold in audio stores cannot beused with this unit.Lights up.The track Nos. recorded on the CD are displayed.1 ¡47 6¢ON/STANDBY01¡476¢06PLAY/PAUSE6PLAY/PAUSE TRACK7STOPTRACK TRACKNO. SINGLE TIME617283941050 :1 0 0 0TRACK TRACKNO. SINGLE TIME617283941050 :1 0 0 5The figure shows an example for the DPF-3010