Kenwood DPF-1010 Instruction Manual

Also see for DPF-1010: Service manual Service manual

Kenwood DPF-1010 Instruction Manual Manual pdf 19 page image

19DPF-3010/2010/1010 (En): Keys and control used in the operations described on this page.Press any one of these keys.÷ The edited data is cleared entirely.To clear the edited contents÷ When the CHECK key is pressed, track numbers and remaining timein the file A are displayed first, then those in the file B.÷ The "P.C." indicator goes off in a few seconds.To check the edited contents Lights up.Peak searchThis function identifies the highest peak level of the entire recording on a CD before recording the CD on the cassette deck.With this unit, after the peak level of each track recorded on the CD has been searched, the section of the music containing the highest peak level will beplayed repeatedly so that the recording level of the cassette deck or MD (analog recording) can be adjusted easily.This feature is particularly convenient when using a cassette deck with manual recording level adjustment which does not have the automatic recordinglevel adjustment function.(This unit cannot perform peak search recording when used with a cassette deck equipped with the peak search function.)To cancel Peak search:Press the 7 key.÷ Press the PEAK SEARCH key.÷ After a high-speed search of all tracks, the searched peak level sectionwill be repeated at normal speed.÷ The peak level is detected by sampling the section which seems tocontain the maximum level in the disc. However, it may happen thatthe transient maximum level is not detected. Therefore, it isrecommended to set the recording level by leaving a certain marginabove the detected peak level.1 ¡47 6¢P.MODE CLEAR0PEAK SEARCH7STOPEDITP.C.5AF I L ECHECKThe figure shows an example for the DPF-3010