Kenwood DPF-1010 Instruction Manual

Also see for DPF-1010: Service manual Service manual

Kenwood DPF-1010 Instruction Manual Manual pdf 15 page image

15DPF-3010/2010/1010 (En)÷ When a track No. is selected, the track will be added to the end of theexisting program.Press to clear tracks from the end.To check or change the programmed tracksTo clear tracks from the program1 Press the CHECK key.Press until the track No. tobe changed is displayed.2 Select the new track No.Auto space functionDuring programming of tracks, a non-recorded space of a fewseconds will be automatically created between tracks. By recordingtracks with these spaces on tape, the search and repeat playoperations of tape using the DPSS function (which works bysearching the non-recorded spaces) can be performed reliably.÷ Even when the performances of two tracks are continuous (whichoccurs with classical or live recording music), the spaces will becreated if they have different track numbers.÷ Each time the key is pressed, the last track in the program is cleared.÷ The tracks which are programmed earlier than the track being playedcannot be cleared.÷ Selected tracks can be also completely cleared just by operating the 0key.÷ The entire program is cleared.3 Set the entry.÷ Perform only step 1 to simply check the program.÷ Each time the key is pressed, the program No. (P-No.) and the track No.on CD are displayed.÷ The previous display resumes in a few seconds.÷ Press it while the “P.C.” indicator is lit.÷ The track being played cannot be changed.To clear all track.Lights up.To add a track to the program1 Select the desired track No.2 Press the P.MODE key.CHECK0 +107 8 94 5 61 2 3P.MODE0 +107 8 94 5 61 2 3CLEARP.MODETRACKNO. P.C. 63PGM0 6 P _ 0 2