Kenwood DPF-J5010 Instruction Manual

Also see for CD-224M: Service manual Instruction manual Instruction manual Instruction manual

Kenwood DPF-J5010 Instruction Manual Manual pdf 14 page image

14CD-224M/DPF-J5010 (En): Keys and controls used in the operations described on this page.Normal play (TRACK mode)SETABC2DEF3JKL5GHI4MNO61TUV8PRS7WXY9QZ0& ( ) – /+100' , : ? !+10SETCHARACTER/SEARCHDOWN UP4 ¢CURSORL R1 ¡1D 32 08 :1 321D 32 :1 32∞ DISC SKIP 5Playback from desired track1 Select the disc.1 Select the disc number.Previous disc Next disc2 Set the input.Go to step 2 within 8 sec.2 Select the track number.1 Input the track number.2 Set the input.Skipping tracksTo skip forwardTo skip backward÷ When the 4 key is pressed once during playback, the track beingplayed will be played from the beginning.Display when disc No. 123 is selected÷The disc number can be selected directly by using the DISC SELECTORand numeric keys in place of the DISC SKIP keys.÷When the disc corresponds to CD-TEXT, or when the disc title has beenregistered, the disc title will be displayed with scrolling. Discs can beselected while looking at the recorded contents.“Registration of Title Name” )÷Repeat step 1 when it is required to change the disc number.Press the numeric keys in the following order...Track No.8 : 8Track No.14 : 14Track No.20 : 2)Display when track No. 8 is selected÷ Playback starts.÷ In the case of a CD-TEXT disc, the track's title is scrolled on the display.÷ Repeat step 2 when it is required to change the track number. Whenthe disc corresponds to CD-TEXT, track numbers can be selected whilelooking at the track titles.SearchingBackward search Forward search÷ Playback starts from the position where the key is released.Preparation ÷ Load discs into the carousel. 0Within 8 seconds!Within 8 seconds!