Kenwood DPF-J5010 Instruction Manual

Also see for CD-224M: Service manual Instruction manual Instruction manual Instruction manual

Kenwood DPF-J5010 Instruction Manual Manual pdf 6 page image

CD-224M/DPF-J5010 (En)6System connectionsSYSTEM CONTROLLRCDLROUTPUT SYSTEMCONTROLSL16 XS 8DIGITALOUTOPTICALNotesNotesSystem connectionsMake connections as shown below.When connecting the related system components, referalso to the instruction manuals of the related components.Do not plug in the power lead until all connections are com-pleted.Be sure to use this unit placed on a level surface.Malfunction of microcomputerIf operation is not possible or erroneous displayappears even though all connections have beenmade properly, reset the microcomputer refer-ring to “In case of difficulty”. ⁄Optical connection(Except for the U.S.A., U.S. Military and Canada)Optical fiber cable (Commercially-available)To OPTICAL terminalslike receiver, MD, DAT,etc.Remove the protection capwhen using the DIGITALOUTPUT (OPTICAL) jack.SL 16/XS8 switch 7System control cordTo wall ACoutletAudio cordDigital amplifier or receiver, etc.1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unpluggingconnection cords without removal of the power cord can cause malfunctions or damage to the unit.