Kenwood DPF-J5010 Instruction Manual

Also see for CD-224M: Service manual Instruction manual Instruction manual Instruction manual

Kenwood DPF-J5010 Instruction Manual Manual pdf 20 page image

20CD-224M/DPF-J5010 (En): Keys and controls used in the operations described on this page.Registration of Title Name∞ DISC SKIP 5MODESETSET∞ DISC SKIP 5IT LT IE NI UP NT OD M-D -- SC LE CE NT OD MRegistration of Title NameFor discs not corresponding to CD-TEXT, a title name canbe given to the disc (max. 25 characters). Operation is pos-sible also when the door panel is open. It is convenient toregister titles while discs are being inserted.Select the desired disc.1 Switch to title name input mode.21 Press the MODE key.2 Select “TITLE INPUT”.3 Set the input.÷ When the MODE key is pressed during title name input mode, the inputmode is cancelled.Preparation ÷ Load discs into the carousel. 0÷ Set the CD player to stop mode.÷ Check that the unit is in the normal playTRACK mode. #1 Select the disc number.÷ The disc number can be selected directly by using the numeric keys inplace of the DISC SKIP keys.÷ During playback, the disc only being played can be selected.2 Set the input.Previous disc Next disc1. For discs corresponding to CD-TEXT, a new title name can not be registered.2. As the entered title names and the CD-TEXT title information are memorized, the information may be displayed even when a disc has beenremoved.Assigning Title NamesNotesNotesThe display flashes.