Kenwood DPF-J5010 Instruction Manual

Also see for CD-224M: Service manual Instruction manual Instruction manual Instruction manual

Kenwood DPF-J5010 Instruction Manual Manual pdf 18 page image

18CD-224M/DPF-J5010 (En): Keys and controls used in the operations described on this page.Programming tracks in desired order (PGM mode)GP ER EP TA O2 DN 0T 3GP ER EP TA O2 DN 0T 3REPEAT6REPEAT6∞ DISC SKIP 5Preparation ÷ Load discs into the carousel. 0Repeated playback (REPEAT mode)To repeat only the desired tracks1 Program the desired tracks by per-forming steps 1 to 3 of “Program-ming tracks in desired order”.^÷ Up to 32 tracks can be programmed by repeating steps 1.2 Switch REPEAT ON.3 Start playback.÷ The current status is displayed when the key is pressed once. When itis pressed while the status is displayed, the repeat ON status can be setto OFF (or vice versa).÷ All of the programmed tracks will be repeated.÷ In case only one track is programmed, only that track will be repeated.To cancel repeated playbackPress the REPEAT key twice. (REPEAT ON → OFF)To repeat one selected disc1 Check that the unit is in the normalplay TRACK mode. #3 Start playback.Previous disc Next discWithin 8 seconds!2 Select the disc number.4 Switch REPEAT ON.÷ The disc number can be selected directly by using the DISC SELECTORand numeric keys in place of the DISC SKIP keys.For random repetition (For music type repetition §For best selection repetition •To cancel repeated playbackPress the REPEAT key twice. (REPEAT ON → OFF)÷ The current status is displayed when the key is pressed once. When itis pressed while the status is displayed, the repeat ON status can be setto OFF (or vice versa).