CD-206/204/203/DPF-R6010/R4010/R3010 (En)16 Press to clear tracks from the end.To clear tracks from the programTo clear all tracks÷ Each time the key is pressed, the last track in the program is cleared.÷ The tracks which are programmed earlier than the track being playedcannot be cleared.÷ Selected tracks can be also completely cleared just by operating the 0key.÷ The entire program is cleared.÷ Even when the performances of two tracks are continuous (whichoccurs with classical or live recording music), the spaces will becreated if they have different track Nos.Auto space functionDuring programming of tracks, a non-recorded space of a fewseconds will be automatically created between tracks. By record-ing tracks with these spaces on tape, the search and repeat playoperations of tape using the DPSS function (which works bysearching the non-recorded spaces) can be performed reliably.Time display on CD player (TIME DISP.)Each press of the TIME DISP. (TIME DISPLAY) key changesthe displayed contents.1 1:23 : Elapsed time of track being played2 -2:23 : Remaining time of track being played3 23:45T : Elapsed time of entire disc (T lights up.)4 -36:25T : Remaining time on entire disc (T lights up.)÷ Only the display 1 and 2 will be displayed in PGM, RANDOM and EDITmodes.Do this operation in the play mode.TIME DISP.CD-206/DPF-R6010CD-204/203/DPF-R4010/R3010REMOTE CONTROL UNITRC-P0601CLEARCLEARP.MODETo program all tracks on a disc (CD-204/203/DPF-R4010/R3010 only)3 Press the P. MODE key again.2 Select the desired disc.1 Press so that the "PGM" indicator lights.DISC 1 DISC 2 DISC 3 DISC 4 DISC 5P.MODEP.MODEALL 10987654321P _ 0 1ALL indicator lights up.CD-206/DPF-R6010CD-204/203/DPF-R4010/R30101 1:23 : Elapsed time of track being played (SINGLE lights up.)2 -2:23 : Remaining time of track being played (SINGLE lightsup.)3 23:45 : Elapsed time of entire disc (TOTAL lights up.)4 -36:25 : Remaining time on entire disc (TOTAL lights up.)Programmed play (PGM mode)