Kenwood DPF-R3010 Instruction Manual

Also see for CD Series: Instruction manual Instruction manual

Kenwood DPF-R3010 Instruction Manual Manual pdf 18 page image

CD-206/204/203/DPF-R6010/R4010/R3010 (En)181 Press so that the “PGM” indicatorlights.Repeated playbackTo repeat only the programmed tracks: Keys and controls used in the operations described on this page.™Preparation ÷ Load a disc in the CD player.2 Select the disc.3 Select the desired track number.4 Set the entry.5 Repeat steps 2 – 4 above.6 Press the REPEAT key.7 Start playback.Go to step 3 within 8 seconds.Go to step 4 within 8 seconds.For the CD-206/DPF-R6010The current status is displayed when the keyis pressed once.When it is pressed while the status is dis-played, the repeat ON status can be set to OFF(or vice versa).÷ All of the programmed tracks will be repeated.÷ In case only one track is programmed, only that track will be repeated.÷ Up to 32 tracks can be programmed. When “FULL” is displayed, nomore tracks can be programmed.Hereafter the illustration of the common partson the front panel is of CD-206/DPF-R6010.P.MODEDISC 1 DISC 2 DISC 3 DISC 4 DISC 54 ¢1 2 34 5 67 8 90 +10P.MODEREPEAT6Main unit Remote control unitCD-206/DPF-R6010CD-204/203/DPF-R4010/R3010GP 0M 1 ID CS ?PGM54321ER EP TA ONREPEATTRACK NO.DISCNO.PGM54321 0 13CD-206/DPF-R6010CD-204/203/DPF-R4010/R3010PGM indicator light up.REPEAT indicator light up.REMOTE CONTROL UNITRC-P0601