Kenwood DPF-R3010 Instruction Manual

Also see for CD Series: Instruction manual Instruction manual

Kenwood DPF-R3010 Instruction Manual Manual pdf 4 page image

CD-206/204/203/DPF-R6010/R4010/R3010 (En)4LRCDSYSTEMCONTROLAC110-220V AC220-240VLRVARI ABLELINE OUTPUT@ DIGITAL OUTPUTSYSTEM CONTROLOPTICALCOAXIALSL16 XS 8ƒTEXTOPTICALCOAXIALLRSL16 XS 8ƒAC 110-120V 2 3 AC 220-240VSYSTEMCONTROL LINE OUTPUTDIGITALINPUTSystem connectionsCaution:Do not plug in the power lead until all connections arecompleted.If operation is not possible or erroneous display appears even thoughall connections have been made properly, reset themicrocomputerreferring to “In case of difficulty”. ∞Make connections as shown below.When connecting the related system components, refer alsoto the instruction manuals of the related components.1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging connectioncords without removal of the power cord can cause malfunctions or damage to the unit.NotesNotesConnection to digital amplifier or MD (CD-206/DPF-R6010 only)Optical fiber cable÷ When using an optical fiber cable to connect this unit to a digitalamplifier, insert the plug straight into the jack until a snap sound isheard.÷ Be careful not to bend, coil, or bundle the optical fiber cable.÷ Optical fiber cables available on the market may not always be able tobe used with this player. If your cord cannot be used with this unit,consult the store from which you purchased the cord or your nearestdealer.Connect the DIGITAL OUTPUT (OPTICAL or COAXIAL) jack to the digital input jack of the amplifier, DAT recorder, MD recorder,etc., using an optical fiber cable or coaxial cable which are commercially available in audio stores.Malfunction of microcomputer75Ω coaxial cablewith RCA PIN.(Commercially-available)Remove the protection cap when using theDIGITAL OUTPUT (OPTICAL) jackSL 16/XS8 switch 5(OPTICAL)DIGITAL INPUT(COAXIAL) Digital component (MD, DAT, etc.)System control cordCommercially-availableoptical fiber cableDigital amplifier(or ordinary amplifier, receiver, etc.)Audio cordTo wall AC outletTo wall AC outletSL 16/XS8 switch 5CD-206/DPF-R6010 :CD-204/203/DPF-R4010/R3010 :