Kenwood DPF-R3010 Instruction Manual

Also see for CD Series: Instruction manual Instruction manual

Kenwood DPF-R3010 Instruction Manual Manual pdf 21 page image

21CD-206/204/203/DPF-R6010/R4010/R3010 (En)EditingLight up.1 Press so that the "MULTI EDIT " indicator light.: Keys and controls used in the operations described on this page.Enter the recording time of the tape.)2Do this operation in the stop mode.Press twice3 Select the desired track.1 Select the disc (one disc only).Hereafter the illustration of the common partson the front panel is of CD-206/DPF-R6010.EDITMain unit Remote control unit4 ¢ 1 2 34 5 67 8 90 +10MULTI EDIT (Except for CD-206/DPF-R6010)Several CDs can be edited and recorded on 1 tape.Choose songs from each disc, and edit/record while con-firming the remaining time on files A and B, respectively.DISCNO.PGM54321MULTIEDITDISC 1 DISC 2 DISC 3 DISC 4 DISC 52Select the tracks to be recorded.4 Start recording.÷ If you made a mistake, press the CLEAR key and select the correcttrack.÷ The time remaining on side A or side B is indicated on the display.÷ When the time left on side A is less than the play time of the selectedsong, that song will be programmed on side B.÷ If “FULL” is displayed, no further programming can be accepted.÷ With the CCRS function, the recording starts after about 1 minute.÷ If you have a cassette deck capable of Double-speed recording, useNormal-speed recording.When recording with a cassette deck equipped with CCRSfunction:Press the CCRS key (Cassette deck).÷ Change discs and, if the “b-01” indication is given when you first selecta song, turn the tape to the start of side B.When recording with a normal cassette deck:1 Adjust the recording levels.2 Press the record key.3 Play the CD.5 Repeat step 3,4 above.«P.MODEREMOTE CONTROL UNITRC-P0601