Kenwood DPX-MP7050 Instruction Manual

Also see for DPX-MP7050: Service manual

Kenwood DPX-MP7050 Instruction Manual Manual pdf 12 page image

Character type DisplayAlphabet upper case "A"Alphabet lower case "a"Numbers and symbols " *"5 Select the charactersPress the [FM] or [AM] button.Characters can be entered by using a remote with a numberbuttons.Example: If "DANCE" is entered.Character Button Times pressed"D" [3] 1"A" [2] 1"N" [6] 2"C" [2] 3"E" [3] 26 Repeat steps 3 through 5 and enter the name.7 Exit name set modePress the [NAME] button.• When operation stops for 10 seconds the name at that time isregistered, and Name Set mode closes.• At registration, up to 8 characters can be entered into each name.• Memory numbers- Total number of FM and AM stations: 30 stations- 50 disc names can be registered in internal CD player andexternal CD changer.• The title of station/CD can be changed by the same operationused to name it.• If this unit is removed from the battery, DNPS/SNPS is erased.General features— 12 —EnglishAttaching a title to a Station or CD.1 Receive or play the station/disc you want to attach a title to• A title can't be attached to MD and MP3/WMA media.• Disc Naming is unavailable when Magazine Random Play isperformed.2 Enter name set modePress the [NAME] button for at least 2 seconds."Name Set" is displayed.3 Move the cursor to the enter character positionPress the [4] or [¢] button.4 Select the character typePress the [38] button.Each time the button is pressed the character type switches asshown below.Station/ Disc Naming (SNPS/DNPS)Selecting the illumination color mode.Press the [COLOR] button for at least 1 second.Each time the button is pressed the illumination color modeswitches as shown below.Information DisplayIllumination color scan "Color Scan"Color mode 1 "Color mode1"Color mode 7 "Color mode7"The selected illumination color will differ depending on the setting of (page 11).…Illumination Color Selecting