Kenwood DPX-MP7050 Instruction Manual

Also see for DPX-MP7050: Service manual

Kenwood DPX-MP7050 Instruction Manual Manual pdf 30 page image

— 30 —EnglishFunction Setting SystemBecause authorization by the Security Code is required when it'sremoved from the vehicle, personalizing this unit is by using theSecurity Code is a help in preventing theft.When the Security Code function is activated, the code can't bechanged and the function can't be released.Note, the Security Code can be set as the 4 digit number of yourchoice.1 Select Security Code modePress the [FM] or [AM] button.Select the "CODE STBY" display.2 Enter Security Code modePress the [38] button for at least 2 seconds.When "CODE WRITE" is displayed, "CODE ****" is displayed.3 Enter the Security CodePress the [1] — [4] button.Example: If the Security Code is "3510".Step Button Times pressed Display1 [1] 4 "3"2 [2] 6 "5"3 [3] 2 "1"4 [4] 1 "0"4 Confirm the Security CodePress the [38] button.When "CODE **** 1" is displayed.5 Do the step 3 and step 4 operation, and reenter the securitycode."CODE WRITE" is displayed.The Security Code function activates.When a Code different from step 3 is entered, repeat from step 3.Security CodeSwitching the preout between the rear and non-fading. (In non-fading it outputs without effect from the fader control.)Display Setting"Preout REAR" Rear preout."Preout N-F" Non-fading preout.Switching PreoutSetting the operation check sound (beep sound) ON/OFF.Display Setting"BEEP On" Beep is heard."BEEP Off" Beep canceled.Touch Sensor ToneFunction items in Standby:Setting the Demonstration when Power is turned ON.Display Setting"Opening On" Demonstration is carried out when Power isturned ON."Opening Off" Demonstration is not carried out when Power isturned ON.Opening Demonstration