Kenwood DPX-MP7050 Instruction Manual

Also see for DPX-MP7050: Service manual

Kenwood DPX-MP7050 Instruction Manual Manual pdf 13 page image

Selecting the display when this device is switched to Auxiliaryinput source.1 Select Auxiliary input sourcePress the [SRC] button.Select the "AUX"/ "AUX1" display.2 Enter Auxiliary input name setting modePress the [NAME] button for at least 2 seconds."Name Set" is displayed.3 Select the Auxiliary input namePress the [4] or [¢] button.Each time the button is pressed it switches through the belowdisplays.• "AUX"/ "AUX1"• "TV"• "VIDEO"• "GAME"• "PORTABLE"• "DVD"4 Exit Auxiliary input name setting modePress the [NAME] button.• When operation stops for 10 seconds, the name at that time isselected, and Auxiliary input name setting mode closes.• Auxiliary input name setting cannot be applied to the optionalAuxiliary input sources shown below.- CA-C1AX- CD changer with an Auxiliary input function installed.• If this unit is removed from the battery, the Auxiliary input name isreturned to "AUX"/ "AUX1".Auxiliary Input Name Setting— 13 —1 Enter Audio Control modePress the [AUD] button."Audio CTRL" is displayed.2 Select the Balance/ Fader Control modePress the [AUD] button.Select the "B- "/ "F- " display.Each time the button is pressed the Balance/ Fader Controlmode, the X’Over Control mode and the Amp Control modeswitch.3 Adjust the BalancePress the [4] or [¢] button.Adjust the FaderPress the [FM] or [AM] button.Each time the button is pressed the items that can be adjustedswitch as shown below.Adjustment Item Display RangeBalance "B- " Left 15 — Right 15Fader "F- " Rear 15 — Front 154 Exit Audio Control mode modePress the [AUD] button for at least 1 second.Balance/ Fader Control