Kenwood DPX-MP7050 Instruction Manual

Also see for DPX-MP7050: Service manual

Kenwood DPX-MP7050 Instruction Manual Manual pdf 18 page image

Temporarily have reception switched from stereo to mono toreduce multi-path noise when listening to the FM station.Press the [CRSC] button for at least 1 second.Each time the button is pressed CRSC turns ON or OFF.When it's ON, "CRSC On" is displayed.CRSC (Clean Reception System Circuit)Calling up the stations in the memory.1 Select the bandPress the [FM] or [AM] button.2 Call up the stationPress the [1] — [6] button.Preset TuningPutting a station with good reception in the memoryautomatically.1 Select the band for Auto Memory EntryPress the [FM] or [AM] button.2 Enter Function Setting modePress the [FNC] button for at least 1 second."Function Set" is displayed.3 Select the Auto Memory Entry modePress the [FM] or [AM] button.Select the "AME Ready" display.4 Open Auto Memory EntryPress the [38] button for at least 2 seconds.When 6 stations that can be received are put in the memory,Auto Memory Entry closes.Auto Memory EntryPutting the station in the memory.1 Select the bandPress the [FM] or [AM] button.2 Select the frequency to put in the memoryPress the [4] or [¢] button.3 Put the frequency in the memoryPress the [1] — [6] button for at least 2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in the memory on each [1] —[6] button.Station Preset MemoryTuner features— 18 —English