16PreparationsDVR-605/DVR-6100/DVR-6100K (EN)MENU STOP PLAY/PAUSEINPUT7 60ON SCREENVOLUMEOPEN/CLOSEPOWER-ON/–OFFSTANDBYACTIVE EQENTERMIC LEVELCS IITOP MENU/BANDDSPPRO LOGIC IIDOLBY DIGITALDTSPHONES(OPTICAL)VIDEO AUDIO LRFRONT AUXDIGITAL1270@#%& $^*(48!9653PARENTAL LOCKindicatorPROG. (Program)indicatorPLAY/PAUSE indicatorIN/OUT status indicatorL : Left speakerC : Center speakerR : Right speakerLFE : Low Frequency EffectSW : SubwooferLS : Left surround speakerS : Surround speakersRS : Right surround speakerDisplay1 POWER switch *2 STANDBY indicator ^3 LISTEN MODE indicators E4 MIC jack and LEVEL control ·(DVR-6100K only)5 4, ¢ (Skip) keys ¡¶6 FRONT AUX jacks %7 PHONES jack *8 Door9 TOP MENU/BAND key ¡°0 INPUT key *! Cursor Up (5), Down (∞),Left (2) and Right (3) keysENTER key •ey@ 6 (PLAY/PAUSE) key §# 7 (STOP) key §$ MENU key y% ON SCREEN key ∞•^ ACTIVE EQ key (& VOLUME CONTROL knob ** 0 (OPEN/CLOSE) key §( Disc tray §DVD indicatorVCD indicatorCD indicatorMP3 indicatorINTRO SCAN indicatorRANDOM indicatorREPEAT indicatorsREPEAT1 REPEATALL REPEATA-B REPEATCharacterinformationdisplay sectionControls and indicatorsRDS indicator (onlyfor Europe and U.K.)PBC indicatorTITLE indicatorTRACK indicatorCHAPTER indicatorAUTO indicatorTUNED indicatorST (Stereo) indicatorSTANDBYThe STANDBY indicator lights when the power cable is plugged into an outlet and the POWER switch is set to ON. While thestandby indicator is lit, a small amount of power is supplied to the system to back up the memory. When the POWER key on theremote control unit is pressed in STANDBY status, the STANDBY indicator goes out and the main unit reaches operation status.When the POWER switch is set to OFF in operation status, the unit will return to operation status when the POWER switch is set toON again. When the POWER switch is set to OFF in STANDBY status, the unit will return to STANDBY status when the POWERswitch is set to ON again.ACTIVE EQindicator