Kenwood DVR-605 Instruction Manual

Also see for DVR-605: Instruction manual Service manual

Contents

54DVR-605/DVR-6100/DVR-6100K (EN)Operations1 Press SETUP key for more than 2seconds2 Press the TRIM (5/∞) keys to con-trol the speaker level.CSWLS RSL RFront speakerFront speakerSub wooferCenter speakerSurroundspeakerSurroundspeakerPositioning the speakersTo achieve the optimum effects obtainable with this SURROUND SOUND system, it is important to position the speakersproperly. Refer to the following illustration to find the best location in your room.Speaker settingPreparation1 Play a disc marked ”Dolby Digital”.§2 Stop the playback.37AUTO/MONO5∞TRIMSpeaker level settingFor this unit, the speaker levels have been set in advance so that the best volume balance is obtained withstandard use.Initial set values for the speaker levelLeft Front channel (Lch)(L) : 0dBCenter channel (Cch)(C) : 0dBRight Front channel (Rch)(R) : 0dBRight Surround channel (RSch)(RS) : 0dBLeft Surround channel (LSch)(LS) : 0dBSubwoofer(SW) : 0dBReset as follows to match your listening environment.The test tone is played back from the Left Front speaker.Adjust the VOLUME CONTROL so that it is slightly loudand fix it there.“L” Blinks.L → C → R → RS → LS → SWThe speakers will be switched as follows in intervals ofabout 2 seconds.÷ After all speakers have been adjusted, operate theDelay time setting (T).÷ If you want to quit at this time, press the ENTERkey.Adjust the volume with the TRIM (5/∞) keys while theindicator is flashing so that the volume from all speakersexcept the subwoofer (SW) appears the same. Level ad-justment is possible in the range from -10 dB to +10 dB.NoteNoteAs the subwoofer (SW) has a special playback band, nor-mal adjustment is not possible with the test tone. Pleaseadjust the subwoofer while listening to actual music. (Y)SOUNDActive EQ./SETUP