Kenwood DVR-605 Instruction Manual

Also see for DVR-605: Instruction manual Service manual

Contents

31DVR-605/DVR-6100/DVR-6100K (EN)OperationsDVDChanging the Camera angle CD VCDUsing IntroScan functionUsing the on-screen banner display2 Press the Cursor left/right (2/3) keys until theANGLE icon is highlighted.3 Press the ENTER key.The ANGLE menu appears4 Press the ENTER key repeatedly to select theangle.1 During playback, press the ON SCREEN key.Some disc contains multiple angles in particular sceneor sequence. If the disc only has one angle, this featurewon’t work.IntroScan plays the first few seconds of each track ononly one disc similar to the scan feature that’s on manycar radios.Using the on-screen banner display2 Press the Cursor left/right (2/3) keys until theIntroScan icon is highlighted.3 Press the ENTER key.1 During playback, press the ON SCREEN key.÷ The first 10 seconds of each track play.÷ After Intro Scan goes through all of the tracks, itstops.÷ If you want to stop IntroScan while it’s in progress,just press ENTER key on the remote (the currenttrack starts playing in its entirety).Using the On-screen banner display÷ The menu is switched off when no operation isperformed for about 5 seconds. NoteNoteP.B.C. on mode of VCD, the IntroScan function maynot work.ENTERENTERENTER ENTER(When the On-screen display has gone out, press the ONSCREEN key, select Intro Scan, and press the ENTERkey.)MAIN UNIT REMOTE MAIN UNIT REMOTEON SCREENMAIN UNIT REMOTEMAIN UNIT REMOTEON SCREENMAIN UNIT REMOTEMAIN UNIT REMOTEENTERMAIN UNIT REMOTEON SCREEN ON SCREENENTERENTERENTER ENTERENTER