Kenwood DVR-605 Instruction Manual

Also see for DVR-605: Instruction manual Service manual

Contents

56DVR-605/DVR-6100/DVR-6100K (EN)Operations1 Play a disc marked “Dolby Digital”.32 Select the speaker.REARCENTERFRONTSW3 Press the TRIM (5/∞) key to settingthe speaker level.5∞TRIM1 Select the SAT, CABLE or FRONT key.SATor FRONTAUX2 Press the INPUT MODE key.INPUT MODERANDOMLevel setting using a music sourceA music source can be used for speaker level setting and subwoofer level setting.Speaker level adjustment can be performed bypressing the keys FRONT, CENTER, REAR, and SW.F: Front speakersSwitching is done as follows each time the switchis pressed.1 L ch : Left speaker2 R ch : Right speakerC: Center speakerR: Rear (Surround) speakersSwitching is done as follows each time the switchis pressed.1 LS ch : Left surround speaker2 RS ch : Right surround speakerSW: SubwooferThe speaker level can be changed in the range from -10dB to +10 dB.Changing the INPUT MODEThe input mode can be switched with SAT/CABLE and FRONT. For better sound quality, connect the digital output ofyour component with a coaxial or optical cable and change the input mode as follows.Each press switches the mode.SAT/CABLE input1 AUTO2 COAXIAL3 ANALOGFRONT input1 AUTO2 OPTICAL3 ANALOGNoteNoteWhen the video is displayed, but no sound is putout, the source may not contain digital audio. In sucha case, please switch to ANALOG.Changing the INPUT MODESpeaker settingCABLEor ÷ AUTO input mode only checks the input signal when theINPUT is changed. The input does not automatically switchfrom digital (optical/coaxial) to ANALOG when the digitalsignal from the source component stops. In this case, usethe remote to select ANALOG input mode.