Kenwood KDC-448U Instruction Manual

Also see for KDC-448U: Brochure & specs

Contents

Kenwood KDC-448U Instruction Manual Manual pdf 28 page image

28 | KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448UDisplay settingsInformation display settingSets side and graphic parts of the display.1 Enter Function setting modePress the Control knob for at least 1 second.2 Select the Display select modeThe item can be selected and determined asfollows.“Settings” > “DISP&ILLUMI” > “Display Select”To select the item, turn the Control knob. Todetermine the item, press the Control knob.3 Select the desired Information display settingitemTurn the Control knob to select Display settingitem, and then press the Control knob.Display Overview“Display Select”“Side Select” Sets the side part display for Type A, B, and D.1 / 2 / 3“Graphic Select” Sets the Type C clock display and Type Dspectrum analyzer display.1 / 2“Status” Sets the status display (ON/OFF indicator foreach function) for Type A and B.“ON” / “OFF”( : Factory setting)4 Set the Display setting itemTurn the Control knob to select desired value,and then press the Control knob.The previous item is displayed.5 Exit Function setting modePress the [ ] button for at least 1 second.Illumination color selectionSelecting the Illumination Color of the panel.1 Enter Function setting modePress the Control knob for at least 1 second.2 Select Color select modeThe item can be selected and determined asfollows.“Settings” > “DISP&ILLUMI” > “Color Select”To select the item, turn the Control knob. Todetermine the item, press the Control knob.3 Select the part where you want to set theIllumination ColorDisplay Part“Color Select”“ALL” All“Display” Display“Key” Button“USB&AUX” USB terminal and Auxiliary inputTurn the Control knob to select part, and thenpress the Control knob.4 Select the Illumination ColorTurn the Control knob to select color, and thenpress the Control knob.Select the color from “Variable Scan”/ “Color1” —“Color24”.Adjusting RGB valuesYou can create your original color during theselection from “Color1” — “Color24.”The color you created can be called when youselect “User”.1. Press the Control knob for at least 1 second.Enter the detail color adjustment mode.2. Set the color.Operation type OperationTo select the color to adjust.(red, green, or blue)Push the Control knob towards rightor left.To adjust color.(Range: 0 – 9)Turn the Control knob.3. Press the Control knob.Exit the detail color adjustment mode.5 Exit Function setting modePress the [ ] button for at least 1 second.