46 | KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448UBluetooth setupRegistering Bluetooth deviceTo make your Bluetooth device (cell-phone) usablewith this unit, you need to register it (pairing). Youcan register up to five Bluetooth devices to this unit.When registering from Bluetooth devices1 Turn on the this unit.2 Start registering a unit by operating theBluetooth deviceBy operating the Bluetooth device, register thehands-free unit (pairing). Select “KENWOOD BTCD/R-3P1”, “KCA-BT300”, or “KCA-BT200” from the listof connected units.3 Enter a PIN codeInput the PIN code registered as mentioned in (page 47).Check that registration is complete on theBluetooth device.4 By operating the Bluetooth device, start hands-free connection.When registering from this unit1 Enter Bluetooth modeKDC-X895 KDC-BT848UPress the [ ] button.KDC-X595 KDC-448UPress the [LOG] button for at least 1 second.“BT MODE” is displayed.2 Enter Function setting modePress the Control knob for at least 1 second.3 Select Bluetooth device registration modeThe item can be selected and determined asfollows.“Settings” > “Pairing” > “Device Registration”To select the item, turn the Control knob. Todetermine the item, press the Control knob.Search for the Bluetooth device.When search is completed, “Finished” is displayed.4 Select the desired Bluetooth deviceTurn the Control knob to select Bluetoothdevice, and then press the Control knob.KDC-X895 KDC-BT848UInput the PIN code (steps 5).KDC-X595 KDC-448UWhen “Paring Success” is displayed, PIN code input(steps 5) is not required.When “Pin Code NG” is displayed, press the Controlknob. Then enter the PIN code (steps 5).5 Input the PIN codeOperation type OperationSelect the numbers. Turn the Control knob.Move to the next digit. Push the Control knob towards right.Delete the last digit. Push the Control knob towards left.Transmit the PIN code. Press the Control knob.If “Pairing Success” is displayed, registration iscomplete.6 Return to the device listPress the Control knob.7 Exit Bluetooth modePress the [SRC] button.⁄• This unit allows up to eight digits to be input for a PIN code.If a PIN code cannot be input from this unit, it can be inputfrom the Bluetooth device.• If there are 5 Bluetooth devices registered, you cannotregister a new Bluetooth device.• If the error message appears even though the PIN code iscorrect, try (page 47).Function of KDC-X895, KDC-BT848U, KCA-BT300/BT200 (Optional Accessory)
