Kenwood KDC-448U Instruction Manual

Also see for KDC-448U: Brochure & specs

Contents

Kenwood KDC-448U Instruction Manual Manual pdf 54 page image

54 | KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448UHD Radio™ tuner controlFunction of KTC-HR300, KTC-HR200, KTC-HR100 (Optional Accessory)Basic OperationSelecting HD Radio sourcePress the [SRC] button.Select the “HD RADIO” display.Selecting the bandPush the Control knob towards down.Switches between the FM1, FM2, FM3, and AMbands each time you push towards down.Selecting the stationPush the Control knob leftward and rightward.⁄• The tuning mode can be changed. Refer to setting> (page 56).• During reception of stereo stations the “ST” indicator lightsup.Station preset memoryPutting a station in the memory.1 Select the frequency to put in the memoryPush the Control knob towards right or left.2 Enter Preset memory modePress the [PRESET] button.“Preset List” is displayed.3 Select a number and store it in the memoryTurn the Control knob to select memorynumber (“1” – “6”), and then press the Controlknob for at least 2 seconds.Cancelling the Preset memory modePress the [ ] button.⁄• If you press the [PRESET] button twice in step 2, Mix Stationpreset mode is entered with “Mixed Preset List” displayed.In this mode, different bands and tuner sources (Radio,Sirius, XM etc.) can be saved in the same preset layer, whichallows you to recall the desired station without switchingthe bands or tuner sources.Maximum of six stations can be preset in the Mix Stationpreset mode.Once the Mix Station preset mode is set, you can enter thesame mode by just pressing the [PRESET] button once instep 2.Pressing the [PRESET] button twice returns to the normalStation preset mode.