Kenwood KDC-448U Instruction Manual

Also see for KDC-448U: Brochure & specs

Contents

Kenwood KDC-448U Instruction Manual Manual pdf 33 page image

English | 33Initial settingConfigures initial settings of this unit.1 Select StandbyPress the [SRC] button.Select the “STANDBY” display.2 Enter Function setting modePress the Control knob for at least 1 second.3 Select the Initial setting modeTurn the Control knob to select “Initial Settings”,and then press the Control knob.4 Select the desired Initial setting itemTurn the Control knob to select Initial settingitem, and then press the Control knob.Display Overview“Initial Settings”“Source Select” Select “2” to change the source selectionmethod. Press the [SRC] button, turn theControl knob to select the source, and thenpress the Control knob to determine it.1 / 2“Key Beep” Setting the operation check sound (beepsound) ON/OFF.“ON” / “OFF”“Function Language” Changes the display language of items inFunction setting.“English” / “Français” / “Español”“Built-in AUX” Sets whether to display AUX during sourceselection.“ON” / “OFF”“CD Read” Sets the method for reading CD.When unable to play special format CD, setthis function to “2” to force playing. Note thatsome music CDs may be unplayable evenwhen set to “2”.In addition, audio files cannot be played whenset to “2”. Normally, keep this set to “1”.1: Automatically distinguishes between audiofile disc and music CD when playing disc.2: Forces playing as music CD.“Built-in AMP” Selecting “OFF” turns off the built-in amplifier.Turning off the built-in amplifier improves thequality of the sound from Preout.“ON” / “OFF”“Speaker Select” Fine-tuning so that the System Q value isoptimal when setting the speaker type asfollows;“OFF”: OFF“5/4inch”: For 5 & 4 in. speaker“6x9/6inch”: For 6 & 6x9 in. speaker“O.E.M.”: For the OEM speaker“F/W Update #.##” Upgrades the firmware.Selecting “YES” and then pressing Control knobstarts upgrading the firmware.For how to update the firmware, access ourweb site.http://www.kenwood.com/cs/ce/( : Factory setting)5 Set the Initial setting itemTurn the Control knob to select desired value,and then press the Control knob.The previous item is displayed.6 Exit Function setting modePress the [ ] button for at least 1 second.