Kenwood KDC-448U Instruction Manual

Also see for KDC-448U: Brochure & specs

Contents

Kenwood KDC-448U Instruction Manual Manual pdf 60 page image

60 | KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448UChannel scanEvery receivable Channel is checked for 10 seconds.1 Start Channel ScanPress the [ ] button for at least 1 second.2 Release it when the channel you want to listento is receivedPress the [ ] button for at least 1 second.Function of remote controlDirect access tuningEntering the channel and tuning.1 Enter Direct access tuning modePress the [DIRECT] button on the remotecontrol.2 Enter the channelPress the number buttons on the remotecontrol.3 Search the channelPress the [4] or [¢] button on the remotecontrol.Cancelling Direct access tuningPress the [ ] button on the remote control.⁄• If you make no button operation for 10 seconds, the DirectAccess Tuning mode is automatically canceled.• If you cannot receive any signal in the input Channel dueto bad conditions on radio wave or other such problems,“Acquiring Signal” appears.Satellite radio tuner (Optional accessory) control