Kenwood KDC-5018 Instruction Manual

Also see for KDC-5018: Service manual

Kenwood KDC-5018 Instruction Manual Manual pdf 10 page image

Do not set the right side of the faceplate in the faceplate bracketfirst, when reattaching the faceplate. Doing so may cause theconnector on the faceplate bracket to malfunction.Press the right side of the faceplate until it locks.Hiding the control panel:Press the release button and slide open the faceplate.Push upward the back of the control panel and reverse thepanel.The panel cannot be reversed when the faceplate is not attached.Opening the control panel:Press the upper side of the faceplate.The faceplate will open.Push the bottom of the control panel and close the faceplate.21NOTE2122CAUTIONThe faceplate can be reversed to hide the control panel ordetached form the unit, helping to deter theft.Removing the Faceplate:• When the control panel is visible:Press the release button.• When the control panel has been hidden:Press the upper side of the faceplate.Holding the center part of the faceplate, pull it out.Push back the bottom of the faceplate bracket until it locks.• Do not apply excessive force to the faceplate bracket withoutattaching the faceplate. Doing so will cause the faceplatebracket to be deformed.• Do not touch the connector on the faceplate bracket afterremoving the faceplate. Touching the connector may causedamage to the unit.• The faceplate is a precision piece of equipment and can bedamaged by shocks or jolts. For that reason, keep the faceplatein its special storage case while detached.• Do not expose the faceplate or its storage case to directsunlight or excessive heat or humidity. Also avoid places withtoo much dust or the possibility of water splashing.Reattaching the Faceplate:Hold the faceplate so that the control panel faces the fronttoward you and set the left side of the faceplate in thefaceplate bracket.1NOTE2CAUTION321Theft Deterrent FaceplateGeneral features— 10 —English