Kenwood KDC-5018 Instruction Manual

Also see for KDC-5018: Service manual

Kenwood KDC-5018 Instruction Manual Manual pdf 14 page image

Store the frequency of a station. You can then recall thatstation with a single touch of a button.Select the band/station that you want to have stored.1Station Preset MemoryPress the SRC (source) button repeatedly to select the tunermode. "TUNER" is displayed when the tuner mode has beenselected.Press either the FM or AM button to select the band.Each time you press the FM button, the band switchesbetween the FM1, FM2 and FM3.Press the AM button to select the MW and LW bands.• Auto Seek TuningPress the ¢ button to seek higher frequencies.Press the 4 button to seek lower frequencies.• Preset station seek tuningPress the ¢ button to move to the next preset station (i.e.,the one with the next highest number), and the 4 button tomove to the last preset station (i.e., the one with the nextlowest number).If the frequencies stored at the preset numbers receivestations which were not originally memorized when travelinglong distances, the preset number is not displayed. In suchcases, pressing the 4/¢ button to use preset stationseek will receive channel 1.• Manual TuningPress the ¢ button to increase the frequency by one step.Press the 4 button to decrease the frequency by one step.• The ST indicator lights up when stereo broadcasts are beingreceived.• Please see the menu settings about selecting tuning mode.(page 32)NOTENOTE321TuningFunction of the KDC-V7018RTuner features— 14 —EnglishAM FM4 ¢DISP SRC#1-6AUTO indicatorST indicatorPreset station numberFrequencyBand display