Kenwood KDC-5018 Instruction Manual

Also see for KDC-5018: Service manual

Kenwood KDC-5018 Instruction Manual Manual pdf 9 page image

Function of the KDC-7018You can turn the non-fading output on and off.Turning non-fading output On/Off :Press the NF button for at least one second to set the functionON or OFF."NF ON" is displayed when the non-fading output is set ON.Non-Fading OutputChanging the Clock Display:Each time you press the CLK button, the display switchesbetween the clock and each mode display.The clock indicator lights while the clock is displayed.NOTEClock displayThis function allows you to adjust the setting that is recalledwith the System Q, according to types of speakers.Press the SRC button repeatedly to select the standby mode."ALL OFF" is displayed when the standby mode is selected.Press the Q button to enter the speaker setting mode.Press either the 4 or ¢ button to select the type ofspeaker. The setting switches as follows.Off ("SP OFF") / For 6/6x9 in. speaker ("SP 6*9/6inch") /For 5/4 in. speaker ("SP 5/4inch") /For the OEM speaker ("SP O.E.M.")Press the Q button to end the speaker setting mode.Speaker setting function allows for tuning of bass, middle andtrebleNOTE4321Speaker Settingsound quality parameters:Bass center frequency, bass level, bass quality factor, bassextend, middle center frequency, middle level, middle qualityfactor, treble center frequency, treble level, non-fading level,high-pass filter frequency for front output, high-pass filterfrequency for rear output, and low-pass filter frequency for non-fading output.Their setting values are different depending on the setting of thespeaker setting mode.— 9 —Shut down the audio system temporarily whenever anincoming call is received.TEL mute will not work if a wire is not connected to a car phone.When the telephone rings:When a call is received, "CALL" is displayed and all the unitfunctions are temporarily interrupted.Listening to Audio During a Phone Call:Press the SRC (source) button."CALL" disappears from the display, and the volume of theoriginal source is restored gradually.Turning TEL Mute Off After a Phone Call:Hang up the phone."CALL" disappears from the display.The original source (the one used before the phone call) isreturned to automatically, and the volume restored gradually.NOTETEL MuteFunction of the KDC-V7018R