|
English | 23Bluetooth Audio OperationConnecting a Bluetooth DeviceBefore use the Bluetooth device, you need toconnect Bluetooth device to this unit.Pairing (Registering from Bluetooth devices)To make your Bluetooth Audio player usable withthis unit, you need to register it (pairing).1 Turn on this unitPress the [SRC] button.2 Start registering this unit by operating theBluetooth deviceBy operating the Bluetooth device, register theaudio player (pairing). Select “KENWOOD BT CD/R-4P1”/ “KCA-BT200” from the list of connected units.3 Enter a PIN codeInput the PIN code (“0000”) in the Bluetoothdevice.Check that registration is complete on theBluetooth device.✍ PIN code is set to “0000” as the default. You canchange this code. Refer to Code> (page 48).4 By operating the Bluetooth device, startBluetooth connection.⁄• If pairing does not succeed, try followings.– PIN code is set to “0000”. See (page 48)– Turn off the power of this unit and turn it back on. Andthen try the pairing operation again.– If other audio players have been registered, deletethem. And then try the pairing operation again. See (page 49)• When registering from this unit, refer to Bluetooth device> (page 47).• For details on the Bluetooth Audio player which can beconnected, see (page 57).Basic OperationSelecting Bluetooth Audio sourcePress the [SRC] button. Turn the [VOL] knob andpress it when the desired item is displayed.Select the “BT Audio” display.✍ SRC Select mode 2: Pressing the [SRC] buttonrepeatedly switches source.Pause and playPress the [38] button.Music SearchPress the [4] or [¢] button.⁄• All or some of the operations above cannot beperformed if the Bluetooth audio player is not ready forremote control.• Switching between Bluetooth audio sources doesnot start or stop playback automatically. Perform theoperation for starting or stopping playback.• Some audio players cannot be controlled remotely orreconnected after Bluetooth disconnection. Operate themain unit of the audio player to connect Bluetooth.SRC4MENU VOL¢38 / TIFunction of KDC-BT60UKDC-6047U with KCA-BT200 (Optional Accessory) PreviousNext |