Kenwood KDC-6047U Instruction Manual

Also see for KDC-6047U: Quick start guide Service manual

Contents

34 | KDC-BT60U/ KDC-6047UClock and Other FunctionsInitial SettingsYou can select following Initial Setting items.1 Select the StandbyPress the [SRC] button. Turn the [VOL] knob andpress it when the desired item is displayed.Select the “STANDBY” display.✍ SRC Select mode 2: Pressing the [SRC] buttonrepeatedly switches source.2 Enter Menu List modePress the [MENU] button.3 Enter Initial Setting modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “Initial Settings”.4 Select the setting item to adjustTurn the [VOL] knob.Display Overview“Initial Settings”“SRC Select” Sets the source selection method.“1”/ “2”“Beep” Setting the operation check sound (beep sound)ON/OFF.“OFF”/ “ON”“Russian” When this is set to ON, the following characterstrings are displayed in Russian:Folder name/ File name/ Song title/ Artistname/ Album name/ KCA-BT200 (optionalaccessory)“OFF”/ “ON”“Menu Language” You can select the display language for theMenu list item.“English”/ “French”/ ”Spanish”/ “German”/“Italian”/ “Russian”“Power OFF Wait” Setting the timer to turn this unit’s power OFFautomatically when Standby mode continues.Using this setting can save the vehicle’s batterypower.“-----”/: Power OFF Timer function is OFF.“20min”/ “40min”/ “60min”: Turns the powerOFF after minutes.“Built in AUX” When this is set to ON, AUX source can beselected.“ON”: Allows AUX source to be selected. Usethis setting when the built-in AUX terminalis connected to the external equipment allthe time.“OFF”: Disable AUX source selection. Use thissetting when the built-in AUX terminal isnot used.“Forced CD-DA” Sets the CD read mode.“1”/ “2”“Favorite Delete” Deletes Favorite Preset Memory.Refer to (page 44).“Built in AMP” Selecting “OFF” turns off the built-in amplifier.Turning off the built-in amplifier improves thequality of the sound from Preout.“OFF”/ “ON”“DSI” DSI (Disabled System Indicator) of the unit blinkswhen the faceplate is removed.“OFF”/ “ON”( : Factory setting)5 Make a setting• When the “ PUSH ” icon is displayed (at theright edge of the display)Turn the [VOL] knob to select a setting value,and then press the [VOL] knob.• When the “ PUSH ” icon is not displayedPress the [4] or [¢] button to select asetting value.6 Exit Menu List modePress the [MENU] button for at least 1 second,and then press it again briefly.